Fascia & Soffit across the UK

Someone wants to replace or install new uPVC fascia and soffit boards along the roofline. Compare free, no-obligation quotes from vetted installers, typically £900 - £2,400 installed depending on your city and spec.

  • 4.7/5118 homeowner reviews
  • FENSAvetted installers
  • 10yrtypical guarantee
  • < 24hquotes back to you

Fascia & Soffit - what to expect

Fascia and soffit boards are the horizontal timber (or nowadays uPVC) trim running along the edge of the roof. The fascia is the vertical board you see from the street, the soffit is the underside that closes the gap between the wall and the fascia. Once these rot, water starts getting into the eaves and the rafters — replacing them is almost always cheaper than dealing with the roof damage that follows.

The overwhelming majority of UK homeowners now go with uPVC over timber - it doesn't need painting, doesn't rot, and comes in colours (Anthracite Grey and Black Ash have overtaken white as the most-requested finish since 2020). Standard boards are 300mm deep for fascia and 150-450mm wide for soffit depending on the eaves overhang. Foil-wrapped uPVC gives a wood-grain effect if the property is period or in a conservation area.

A quality install includes over-fascia vents (a continuous slot the birds and bats can't get through) plus soffit ventilation - modern lofts need the airflow to prevent condensation. Ask specifically about ventilation on the quote, cheaper jobs often skip it and you find out two winters later when the loft insulation gets damp. Guarantee lengths vary wildly: 10 years is standard, some brands (Freefoam, Swish) will underwrite 25-year colour retention.

Typical UK price range for fascia & soffit: £900 - £2,400 installed. Actual figures for your city sit on the city page below.

Popular specs for fascia & soffit

300mm x 18mm foil-wrapped uPVC fascia, 9mm hollow uPVC soffit board 150-450mm wide, over-fascia continuous vent, square soffit vents 25/1000mm, aluminium eaves protection tray, stainless steel fixings, colour options: white, Anthracite Grey, Black Ash, Rosewood or Golden Oak woodgrain.

Before you commit - four things to check

  • Ask whether the existing timber is being fully replaced or only capped over - capping is cheaper but hides ongoing rot underneath.
  • Check the quote includes over-fascia venting and soffit vents to Building Regs Part F airflow standards.
  • Insist on aluminium nails or stainless-steel screws for fixings - galvanised nails rust and stain the boards within 5 years.
  • For gables above bay windows, the corner trims and joins need proper mitred corners rather than plastic corner caps - looks much better and lasts.

Fascia & Soffit by area

Every city we cover for fascia & soffit, grouped by region.

Ready to compare fascia & soffit quotes?

Get a free quote

Other services